We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
StarTech.com C2-ETHERNET-EXTENDER network extender Network transmitter & receiver Black 10, 100 Mbit/s
SKU
C2-ETHERNET-EXTENDER
Login for pricing
In stock
StarTech.com 10/100 Ethernet Extender Kit Up to 0.5mi (800m), Long-Range LAN Over Single Pair Wire/RJ45 UTP, Ethernet Booster
UNSPSC: 43222600
- ETHERNET LAN EXTENDER: Unmanaged single-port dual-speed (10/100Mbps) RJ45 network extender kit; Reach distances of up to 0.5mi (800m) to overcome the typical limit of 328ft (100m) for Cat5/Cat5e/Cat6 copper Unshielded Twisted Pair (UTP) Ethernet cable
- EXTENDED RANGE: Use one or two pairs of cable for variable bandwidth and distance; Reach up to 984ft (300m) at 100Mbps using a single-pair Ethernet cabling & up to 2,624ft (800m) at 10Mbps using two-pair ethernet cabling
- FEATURES: Network extension kit acts as a transparent network device seamlessly passing Ethernet protocols; IEEE 802.1q VLAN tag pass-through, WoL, 16K jumbo, PXE, and more; Supports RJ11/phone line cabling; Includes power adapters for remote/local units
- READY TO USE: Long-range Ethernet booster ships ready for deployment; DIP switches for configuration; LED indicators for power, remote/master mode, network status, LAN speed, and LFPT, allowing IT administrators to monitor and assess network connectivity
- APPLICATIONS: Use the Ethernet range extender for remote Internet or network access, IP video surveillance, remote equipment diagnosis, management and control, WiFi APs, automation, VoIP, remote sensors, and more
Extend a 10/100Mbps network up to 0.5mi (800m) using RJ45 or RJ11 cabling
Extend a network or control remote equipment using this Ethernet Extender. Use UTP, Cat5, Cat5e, or Cat6 RJ45 terminated cable for distances of up to 0.5mi (800m). Dual-speed (10/100Mbps) Ethernet signal booster enables efficient and reliable network connectivity.
Extend Network Connectivity
The unmanaged LAN extender utilizes the pairs of wires within a UTP cable to function as a bridge, extending a local network beyond the standard 328ft (100m) limit of a UTP cable. Use one or two pairs of twisted wire to achieve different speeds and distances to better suit the setup. Achieve up to 984ft (300m) at 100Mbps with a single pair of wires and up to 0.5mi (800m) at 10Mbps with two pairs of wires.
Thoughtful Design
The booster kit ships ready to use in a standard setup (remote and local units). DIP switches allow to change the settings and behavior of the units for a custom deployment. Status LEDs provide a visual indication of the network and various settings that allow quick assessment of the setup.
Versatile
The Long-Range LAN Extender can be wall-mounted, using the included hardware. The kit includes power adapters for each unit. Use the LAN extender adapter for Internet or network access to remote office or branch locations, create remote WiFi APs (Access Points), remote IP-based video surveillance, equipment management and control, VoIP, automation, and more. For maximum compatibility, RJ11 copper cable is supported to connect the remote and local units.
Being a transparent network device allows the network extender to support the following Ethernet protocols, such as WoL (Wake-on-LAN), 16K Jumbo frames, 802.1Q VLAN tagging, and PXE boot.
The StarTech.com Advantage
Extend a network or control remote equipment using this Ethernet Extender. Use UTP, Cat5, Cat5e, or Cat6 RJ45 terminated cable for distances of up to 0.5mi (800m). Dual-speed (10/100Mbps) Ethernet signal booster enables efficient and reliable network connectivity.
Extend Network Connectivity
The unmanaged LAN extender utilizes the pairs of wires within a UTP cable to function as a bridge, extending a local network beyond the standard 328ft (100m) limit of a UTP cable. Use one or two pairs of twisted wire to achieve different speeds and distances to better suit the setup. Achieve up to 984ft (300m) at 100Mbps with a single pair of wires and up to 0.5mi (800m) at 10Mbps with two pairs of wires.
Thoughtful Design
The booster kit ships ready to use in a standard setup (remote and local units). DIP switches allow to change the settings and behavior of the units for a custom deployment. Status LEDs provide a visual indication of the network and various settings that allow quick assessment of the setup.
Versatile
The Long-Range LAN Extender can be wall-mounted, using the included hardware. The kit includes power adapters for each unit. Use the LAN extender adapter for Internet or network access to remote office or branch locations, create remote WiFi APs (Access Points), remote IP-based video surveillance, equipment management and control, VoIP, automation, and more. For maximum compatibility, RJ11 copper cable is supported to connect the remote and local units.
Being a transparent network device allows the network extender to support the following Ethernet protocols, such as WoL (Wake-on-LAN), 16K Jumbo frames, 802.1Q VLAN tagging, and PXE boot.
The StarTech.com Advantage
| Performance | |
|---|---|
| Jumbo frames support | Yes |
| Plug and Play | Yes |
| Ethernet LAN data rates | 10,100 Mbit/s |
| Type | Network transmitter & receiver |
| Maximum transfer distance | 31496.1" (800 m) |
| Data transfer rate | 100 Mbit/s |
| Cable types supported | Cat5, Cat5e, Cat6, Cat6a |
| Auto MDIX IEEE | No |
| Technical details | |
| Jumbo frames support | Yes |
| Plug and Play | Yes |
| Ethernet LAN data rates | 10,100 Mbit/s |
| LED indicators | Yes |
| Type | Network transmitter & receiver |
| Maximum transfer distance | 31496.1" (800 m) |
| Data transfer rate | 100 Mbit/s |
| Cable types supported | Cat5, Cat5e, Cat6, Cat6a |
| Auto MDIX IEEE | No |
| Sustainability compliance | Yes |
| Compliance certificates | RoHS |
| Network | |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.1Q, IEEE 802.1x, IEEE 802.3i, IEEE 802.3u |
| Ports & interfaces | |
| RJ-45 ports quantity (transmitter) | 2 |
| RJ-45 ports quantity (receiver) | 2 |
| DC-in jack | Yes |
| Design | |
| Housing material | Plastic, Steel |
| LED indicators | Yes |
| Product colour | Black |
| Power | |
| Power plug type | Type M |
| AC input voltage | 100 - 240 V |
| Input current | 0.5 A |
| Power consumption (typical) | 3.8 W |
| Output voltage | 12 V |
| Output current | 1 A |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | 0 - 50 °C |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating relative humidity (H-H) | 5 - 90% |
| Weight & dimensions | |
| Width | 3.78" (96 mm) |
| Depth | 0.906" (23 mm) |
| Height | 2.87" (73 mm) |
| Weight | 2.59 oz (73.5 g) |
| Colour | |
| Product colour | Black |
| Packaging content | |
| AC adapter included | Yes |
| Quick start guide | Yes |
| Packaging data | |
| Package width | 5.12" (130 mm) |
| Package depth | 5.91" (150 mm) |
| Package height | 7.09" (180 mm) |
| Package weight | 31.7 oz (900 g) |
| Logistics data | |
| Master (outer) case width | 20.3" (515 mm) |
| Master (outer) case length | 12" (305 mm) |
| Master (outer) case height | 16.7" (425 mm) |
| Products per master (outer) case | 15 pc(s) |
You may also be interested in
| Product |
StarTech.com C2-ETHERNET-EXTENDER netw...
Login for pricing
|
Black Box SW1030A network extender Net...
Login for pricing
|
Black Box SW1031A network extender Net...
Login for pricing
|
|---|---|---|---|
| SKU |
C2-ETHERNET-EXTENDER
|
SW1030A
|
SW1031A
|
| Manufacturer |
StarTech.com
|
Black Box
|
Black Box
|