We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
HPE Networking Comware Switch 48G PoE+ 4SFP+ 1-slot 5140HI
| SKU | R9L64A |
|---|---|
| EAN | 0190017587899 |
| Manufacturer | HPE |
| Availability | In Stock |
Highly Resilient and Scalabale Access Layer Switches
The HPE Networking Comware Switch Series 5140 HI uses Intelligent Resilient Framework (IRF) to support virtualization of up to nine physical switches into one logical device for simpler, flatter, and more agile networks.
Supports 10GbE uplinks, static and RIP routing, PoE+, ACLs, and IPv6 for improved and cost‑effective network performance.
DRNI enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device.
iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss, and byte loss rate.
Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch, delivering up to 1440 Watts of PoE+ for powered cameras, phones, and wireless Access Points.
Robust Quality of Service (QoS)
The 5140 HI Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or the entire switch.
Provides extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR.
Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic and preserve more bandwidth for critical data.
Comprehensive Security Control
The 5140 HI Series supports flexible authentication methods including 802.1X, MAC Authentication and Encryption for greater device security and policy-driven application authentication. Per-user Access Control Lists (ACLs) provide identity-driven security and access control.
Dynamic ARP protection with functions such as ARP Detection and ARP packet validation blocks broadcast from unauthorized hosts and prevents eavesdropping or theft of network data.
Supports industry standard AES256 MACsec which provides increased MAC port binding and link group capacity for greater end-to-end security.
Centralized security policy management and network protection with HPE Intelligent Management Center (IMC) which leverages End User Admission Domination (EAD) integrated security policies, network access control and access right control policies to provide a comprehensive integrated security system.
Security with encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection, and RADIUS/HWTACAS.
Simplified Management
The 5140 HI Series can be seamlessly managed with HPE Intelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance, and policy management.
Supports SmartMC, an embedded network management tool, with a web-based GUI to simplify operations and facilitate centralized management at no additional cost. It offers features such as configuration backup, software version management, and seamless switch replacement.
RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events to help network operators with capacity planning and real-time network monitoring.
| Ports & interfaces | |
|---|---|
| SFP+ module slots quantity | 4 |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Copper ethernet cabling technology | 100BASE-TX |
| Network | |
| Copper ethernet cabling technology | 100BASE-TX |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at |
| 10G support | Yes |
| Data transmission | |
| Throughput | 180 Mpps |
| Switching capacity | 336 Gbit/s |
| Design | |
| Stackable | Yes |
| Number of fans | 2 fan(s) |
| Performance | |
| Physical stacking (units) | 9 |
| Memory type | SDRAM |
| Internal memory | 2048 MB |
| Flash memory | 512 MB |
| Stackable | Yes |
| Power | |
|---|---|
| Power supply included | Yes |
| AC input voltage | 100 - 240 V |
| DC input voltage | 48 - 60 V |
| Power source | AC |
| Power over Ethernet (PoE) | |
| Power over Ethernet plus (PoE+) ports quantity | 48 |
| Power over Ethernet (PoE) | Yes |
| Weight & dimensions | |
| Width | 1.72" (43.7 mm) |
| Depth | 17.3" (440 mm) |
| Height | 18.1" (460 mm) |
| Weight | 12.8 lbs (5.8 kg) |
| Technical details | |
| Physical stacking (units) | 9 |
| Stackable | Yes |
| Memory | |
| Memory type | SDRAM |
| Internal memory | 2048 MB |
| Flash memory | 512 MB |
You may also be interested in
| Product |
New
HPE Networking Comware Switch 48G PoE+...
Login for pricing
|
Hot Product
Cisco Catalyst C9300-48U-E network swi...
Login for pricing
|
Recommended
Cisco Catalyst C9300-24UX-A network sw...
Login for pricing
|
Popular
Cisco Catalyst C9300-24UX-E network sw...
Login for pricing
|
Bestseller
Cisco Catalyst C9300-48U-A network swi...
Login for pricing
|
Cisco Catalyst C9300-48UXM-A network s...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
R9L64A
|
C9300-48U-E
|
C9300-24UX-A
|
C9300-24UX-E
|
C9300-48U-A
|
C9300-48UXM-A
|
| Manufacturer |
HPE
|
Cisco
|
Cisco
|
Cisco
|
Cisco
|
Cisco
|
| Rack mounting |
N/A
|
Y
|
Y
|
Y
|
Y
|
Y
|
| Power over Ethernet (PoE) |
Y
|
N/A
|
Y
|
Y
|
N/A
|
Y
|
| Stackable |
Y
|
Y
|
Y
|
Y
|
N/A
|
Y
|
| Switch type |
N/A
|
Managed
|
Managed
|
Managed
|
Managed
|
Managed
|
| Basic switching RJ-45 Ethernet ports quantity |
48
|
48
|
24
|
24
|
48
|
48
|
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
10G Ethernet (100/1000/10000)
|
10G Ethernet (100/1000/10000)
|
Gigabit Ethernet (10/100/1000)
|
10G Ethernet (100/1000/10000)
|




