HPE Networking CX6300M 48p Smart Rate 1G/2.5G/5G/10G PTP/AVB Class8 PoE 4p 100G MACsec Switch

SKU

S0E91A

Skip to the beginning of the images gallery

In stock

HPE Networking CX6300M 48p Smart Rate 1G/2.5G/5G/10G PTP/AVB Class8 PoE 4p 100G MACsec Switch, Managed, L3, 10G Ethernet (100/1000/10000), Power over Ethernet (PoE), Rack mounting

UNSPSC: 43222612

More Information

More Information
SKU	S0E91A
EAN	0190017627083
Manufacturer	HPE
Availability	In Stock

Reviews

Nickname

Summary

Review

Reasons To Buy

AI-native performance and power

The HPE Networking CX6300 Switch Series is a wire-speed solution that uses a fully distributed architecture with Gen7 ASICs that deliver low latency, increased packet buffering, and intelligent power consumption for AI, Wi-Fi 7, and Internet of Things (IoT) requirements.
The Virtual Switching Framework (VSF) allows you to quickly grow your network using high-performance front-plane stacking. Four built-in uplinks support speeds of up to 10, 25, 50, and 100 GbE for a total of 200 to 400 Gbps of stacking throughput per switch.
The Virtual Switching Extension (VSX) uses an inter-switch link (ISL) for high availability and state synchronization between two active-active switches with independent control planes; a switch can belong to either a Virtual Switching Framework (VSF) stack or a VSX cluster, but not both.
HPE Smart Rate multi-gigabit Ethernet delivers adaptive speed options for Wi-Fi, Internet of Things (IoT), and other clients, alongside Class 4 (30W), Class 6 (60W), and Class 8 (90W) PoE on each port (720W, 1440W, 2880W and 4320W maximum PoE budget options).
Additional features include a hibernation mode that enables CX6300 and CX6300L (Layer 2-only) switches to schedule downtime to conserve energy. The CX6300L stackable switches are Layer 2-only, balancing scalability, high-capacity, and cost-effective connectivity.

Automation and analytics

The HPE Networking CX6300 Switch Series delivers enhanced visibility with built-in analytics for real-time monitoring and a time series database (TSDB) that stores configuration and operational state data, making it available to quickly resolve network issues.
HPE Aruba Networking Central provides secure, AI-native full-stack network management and operations to optimize performance, accelerate troubleshooting, and unify wired networks with Wi-Fi, wide area networks, and more.
The Network Analytics Engine (NAE) provides real-time insights and actions, analyzing events that can impact network health and even mitigating problems directly through quarantining to support network, application, system and security operations.
HPE Networking Switch Multi-Edit Software introduces automation that allows for rapid network-wide changes and helps ensure policy conformance post network updates. Intelligent capabilities include search, edit, validation (including conformance checking), deployment, and audit features.
Import switch information into HPE Networking Switch Multi-Edit Software for simplified configuration management and for continual conformance validation.

Full stack management and security

The HPE Networking CX6300 Switch Series is supported on HPE Aruba Networking Central or HPE Mist delivering enhanced network visibility and an expanded AI toolset, addressing the scale and demands of the most mission-critical environments.
Dynamic segmentation that automatically applies and enforces user, device, and application-aware policies on HPE Networking wired and wireless infrastructures.
Improve visibility, performance, end-user experience and simplify IT operations with auto profiling, RBAC, L7 firewall. Application recognition and control are available via CX Advanced Feature Pack. These features are not supported on CX6300L switches.
Switch-to-switch tunnels enable scalable multi-tenancy support with Virtual Extensible Local-Area Networks (VXLAN) to VRF mapping, while allowing policy application through user roles; these features are not supported on CX6300L switches.
Reduce manual IT operations tasks around initial deployment or ongoing configuration changes to accommodate adds, moves, and changes with colorless ports using local user roles and local MAC authentication (LMA).

Deploy in data center topologies

HPE offers customers highly differentiated pre-engineered IT infrastructure solutions that span a wide variety of HPE Compute, HPE Storage, HPE Networking solutions supporting virtualization, vSAN, HCI, HPC, MCS, Microsoft, SAP HANA, VMware, Nutanix application and IaaS service offerings.
The 10/25GbE and 40/100GbE CX switches can be deployed as part of an HPE integrated and mixed compute, storage and networking configurations and deployments.
These ready-to-deploy, integrated IT data center solutions help simplify and speed IT service delivery while reducing the time, risk, and expertise needed to deploy complex solutions.

Description

HPE Networking CX6300M 48p Smart Rate 1G/2.5G/5G/10G PTP/AVB Class8 PoE 4p 100G MACsec Switch. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 45, Console port: RJ-45/USB Type-C. Switching capacity: 1760 Gbit/s. Networking standards: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt. Power over Ethernet (PoE). Rack mounting

Specifications

Management features
Switch type	Managed
Quality of Service (QoS) support	Yes
Switch layer	L3
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	45
Basic switching RJ-45 Ethernet ports type	10G Ethernet (100/1000/10000)
Console port	RJ-45/USB Type-C
QSFP28 ports quantity	4
USB Type-C ports quantity	1
I/O ports	48x HPE Smart Rate 100M [5]/1G/2.5G/5G/10G BaseT Class 8 PoE ports supporting up to 90W per port (MACsec) 4x 10G/25G/40G/100G QSFP/QSFP28 ports (MACsec) Supports PoE standards IEEE 802.3af, 802.3at and 802.3bt (up to 90W) 1x USB-C console port 1x USB Type-A host port 1x OOBM port 1x RJ-45 console port [5] 100M use on HPE Smart Rate ports is limited to full‐duplex only. For 100M half‐duplex support, use 1G ports on other models.
Network
Networking standards	IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
10G support	Yes
Data transmission
Throughput	1310 Mpps
Packet buffer memory	32 MB
Switching capacity	1760 Gbit/s
Protocols
Routing protocols	BGP, OSPF
Design
Product colour	Black
Stackable	Yes
Rack mounting	Yes
Performance
Physical stacking (units)	10
Processor frequency	1800 MHz
Memory type	DDR4-SDRAM
Internal memory	8000 MB
Flash memory	32000 MB
Built-in processor	Yes
Packet buffer memory	32 MB
Stackable	Yes

Power
Power supply included	No
AC input voltage	100 - 240 V
Power consumption note	Depending on installed PSU Idle: 210W – 235W 100% Traffic: 310W – 345W
Power source	PoE
Power supply note	2 field-replaceable, hot-swappable power supply slots 1 minimum power supply required (ordered separately). Supported PSUs JL086A, JL087A, JL670A and JL758A.
Power over Ethernet (PoE)
Power over Ethernet (PoE) power per port	90 W
Total Power over Ethernet (PoE) budget	2640 W
Power over Ethernet (PoE)	Yes
Other features
Latency	1 Gbps: 4.24 μs 10 Gbps: 1.50 μs 25 Gbps: 2.91 μs 50 Gbps: 3.49 μs
Performance management	Management, insights, and actions via HPE Aruba Networking Central or HPE Mist (Requires OS-CX10.18.1002)
Memory and processor	Quad Core Arm Cortex A72 @ 1.8 GHz, 8 GB DDR4, 32 GB eMMC 32 MB Shared Packet Buffer Memory
Fan	Switch has three fan tray slots and comes with three JL714A fan trays installed. Minimum three fan trays required. Fan trays are field replaceable and hot‐swappable. Each fan tray contains two fans.
Weight (imperial)	13.27 lbs
I/O ports	48x HPE Smart Rate 100M [5]/1G/2.5G/5G/10G BaseT Class 8 PoE ports supporting up to 90W per port (MACsec) 4x 10G/25G/40G/100G QSFP/QSFP28 ports (MACsec) Supports PoE standards IEEE 802.3af, 802.3at and 802.3bt (up to 90W) 1x USB-C console port 1x USB Type-A host port 1x OOBM port 1x RJ-45 console port [5] 100M use on HPE Smart Rate ports is limited to full‐duplex only. For 100M half‐duplex support, use 1G ports on other models.
Operational conditions
Operating temperature (T-T)	0 - 45 °C
Weight & dimensions
Width	1.73" (44 mm)
Depth	17.4" (442 mm)
Height	1.73" (44 mm)
Weight	13.3 lbs (6.02 kg)
Weight (imperial)	13.27 lbs
Technical details
Physical stacking (units)	10
Product colour	Black
Stackable	Yes
Processor frequency	1800 MHz
Rack mounting	Yes
Built-in processor	Yes
Memory
Packet buffer memory	32 MB
Memory type	DDR4-SDRAM
Internal memory	8000 MB
Flash memory	32000 MB
Logistics data
Dangerous goods class	Class 8

You may also be interested in

Compare Products
Product	New HPE Networking CX6300M 48p Smart Rate... Login for pricing	Hot Product Cisco Catalyst C9500-24Y4C-A network s... Login for pricing	Bestseller Cisco C9500-48Y4C-A network switch Man... Login for pricing	Recommended Cisco C9300-24S-E network switch Manag... Login for pricing	Popular Cisco C9300-24S-A network switch Manag... Login for pricing	Cisco Catalyst 9300X Managed L3 Login for pricing
SKU	S0E91A	C9500-24Y4C-A	C9500-48Y4C-A	C9300-24S-E	C9300-24S-A	C9300X-24Y-E
Manufacturer	HPE	Cisco	Cisco	Cisco	Cisco	Cisco
Rack mounting	Y	Y	Y	N/A	N/A	Y
Power over Ethernet (PoE)	Y	N/A	N/A	N/A	N/A	N/A
Stackable	Y	Y	Y	N/A	N/A	Y
Switch type	Managed	Managed	Managed	Managed	Managed	Managed
Basic switching RJ-45 Ethernet ports quantity	N/A	0	0	N/A	N/A	N/A
Basic switching RJ-45 Ethernet ports type	10G Ethernet (100/1000/10000)	N	N	N/A	N/A	N/A