We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Caddy (nVent)
Shop By
-
Caddy (nVent) CADDY174 CAT HP J-Hook With 360 Degree BC Beam Clamp, 1/2 in. Max. Flange
Rotates 360 Degrees to Support Various Directional Runs of CableProvides Optimal Support For High-Performance Data Cable, Up to and Including Cat 5e, Cat 6, Cat 6A, Cat 7 and Fiber OpticProvides Superior Fill Capacity and Load Rating Over Most Other Non-Continuous Cable Support AlternativesRounded Edges on J-Hooks Provide Proper Bend Radius Support For High Performance Data CablesCost-Effective Alternative to Expensive Cable TrayComplies With EN 50174-2Meets ISO/IEC 14763-2, TIA 568-C and TIA 569-CNon-Continuous Supports May Not Exceed Spacing of 5 ft. (1.5m) Per TIA 569-C.9.7Cable Capacity is Calculated Based On a 70% Fill Rate -
Caddy (nVent) CADDY174 CAT HP J-Hook Assembled to 360 Degree Hammer On Flange Clip, 5/16 thru 1/2 in. Flange Mount
Requires Only a Hammer to InstallRotates 360 Degrees to Support Various Directional Runs of CableProvides Optimal Support For High-Performance Data Cable, Up to and Including Cat 5e, Cat 6, Cat 6A, Cat 7 and Fiber OpticProvides Superior Fill Capacity and Load Rating Over Most Other Non-Continuous Cable Support AlternativesRounded Edges on J-Hooks Provide Proper Bend Radius Support For High Performance Data CablesCost-Effective Alternative to Expensive Cable TrayComplies With EN 50174-2Meets ISO/IEC 14763-2, TIA 568-C and TIA 569-CNon-Continuous Supports May Not Exceed Spacing of 5 ft. (1.5m) Per TIA 569-C.9.7Cable Capacity is Calculated Based On a 70% Fill Rate -
Caddy (nVent) CADDY174 CAT HP J-Hook Assembled to Multi-Function Clip, 1/4 in. Rod
Quick Attachment to Threaded Rod or WireProvides Optimal Support For High-Performance Data Cable, Up to and Including Cat 5e, Cat 6, Cat 6A, Cat 7 and Fiber OpticProvides Superior Fill Capacity and Load Rating Over Most Other Non-Continuous Cable Support AlternativesRounded Edges on J-Hooks Provide Proper Bend Radius Support For High Performance Data CablesCost-Effective Alternative to Expensive Cable TrayComplies With EN 50174-2Meets ISO/IEC 14763-2, TIA 568-C and TIA 569-CNon-Continuous Supports May Not Exceed Spacing of 5 ft. (1.5m) Per TIA 569-C.9.7Cable Capacity is Calculated Based On a 70% Fill Rate -
Caddy (nVent) CADDY174 CAT HP J-Hook, Pre-Galvanized Steel, 2 in. Dia.
Rounded Edges on J-Hooks Provide Proper Bend Radius Support For High Performance Data CablesMultiple Color Options Aid in the Identification and Organization of the Pathway ApplicationProvides Superior Fill Capacity and Load Rating Over Most Other Non-Continuous Cable Support AlternativesTested According to DIN 4102-12Complies With EN 50174-2Meets ISO/IEC 14763-2, TIA 568-C and TIA 569-C -
Caddy (nVent) CADDY174 CAT HP J-Hook With Angle Bracket, Pre-Galvanized Steel, 1 5/16 in. Dia., 1/4 in. Mounting Hole
Ideal For Attaching to Concrete, Steel or Wood SurfacesProvides Optimal Support For High-Performance Data Cable, Up to and Including Cat 5e, Cat 6, Cat 6A, Cat 7 and Fiber OpticProvides Superior Fill Capacity and Load Rating Over Most Other Non-Continuous Cable Support AlternativesRounded Edges on J-Hooks Provide Proper Bend Radius Support For High Performance Data CablesCost-Effective Alternative to Expensive Cable TrayComplies With EN 50174-2Meets ISO/IEC 14763-2, TIA 568-C and TIA 569-CNon-Continuous Supports May Not Exceed Spacing of 5 ft. (1.5m) Per TIA 569-C.9.7Cable Capacity is Calculated Based On a 70% Fill Rate -
Caddy (nVent) MF-M Series Conduit to Stud Attachment, Spring Steel, For 1/2 or 3/4 in. EMT Conduit
MF-M snap-close conduit-to-stud attachment fastens to stud with screw for additional support. -
Caddy (nVent) H-MSM Series Side Mount Conduit to Flange Clip For 1/2 or 3/4 in. EMT Conduit and 5/16 to 1/2 in. Flange, Spring Steel
Available With Conduit Clip Bottom Mounted or Side MountedAvailable For EMT, Rigid and Aluminum ConduitRequires Only a Hammer to InstallWill Pivot Thru 360 Degrees -
Caddy (nVent) Spring Steel EM-M Series Conduit/Pipe to Flange Clip For 1/2 in. EMT or Rigid Conduit and 5/16 to 1/2 in. Flange
Used to Support Pipe From Beam FlangesPipe/Tube Clip Pivots a Full 360 DegreesAvailable With Conduit Clip Bottom Mounted or Side Mounted -
Caddy (nVent) Multi Function Clip With 1/4 in. Screw Hole For 1/4 in. Rod or No. 12 Wire
Supports No. 10-24 and 1/4-20 Threaded Bridle RingsSupports 4 or 4-11/16 in. Electrical Box
