We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Axiom SSD3558HX1T9-AX internal solid state drive 1.92 TB 2.5" Serial ATA III 3D TLC
SKU
SSD3558HX1T9-AX
- Silicon Motion SM2258 controller
- SLC caching accelerates burst performance
- Direct-to-TLC mode enhances sustained write performance
- Global wear leveling evens program/erase counts to extend drive lifespan
- StaticDataRefresh technology ensures data integrity
- Intelligent garbage collection routines for advanced free space management
- TRIM command support (OS dependent)
- S.M.A.R.T. support
- LDPC hard and soft decode ECC
- DEVSLP support
| SKU | SSD3558HX1T9-AX |
|---|---|
| EAN | 0198105031880 |
| Manufacturer | Axiom |
| Availability | In Stock |
The Axiom C565e Series SSD features high quality 3D TLC NAND flash and the security features of OPAL 2.0/256-bit AES Encryption these SSDs are loaded with enhancements to promote a secure, high performing and reliable computing environment.
The 3D TLC SSD provides outstanding transfer speeds. Improved system startup, data access, application loading, and backup times are realized when upgrading systems to an Axiom SSD. External DRAM and SLC Cache is included and further enhances read/write and IOPS ratings. The 3D TLC SSD is an ultra-low-power storage solution with DevSleep support, providing improved notebook battery life. 3D TLC SSDs are compatible with any operating system and work in both SATA and SAS environments.
Fast Performance
• Highest read and write speeds in its class
• Virtually zero spin up or seek times
• Zero rotational latency
• High sustained data transfer rate
Secure
• OPAL 2.0 Compliant
• 256-bit AES compliant Data Encryption
Reliable
• TRIM, Wear Leveling, StaticDataRefresh and LDPC ECC functions optimize data processing efficiency
• S.M.A.R.T. and a built-in temperature sensor assist with monitoring drive health
• No volatile memory elements
• Improved resistance to shock & vibration
• Predictable and manageable failure modes reduce IT costs
Reduced Power Requirements
• No moving parts
• Super-low operating and standby power needs
• Power requirements notably reduced over a typical HD
Improved Operation
• Noise and vibration free
• Virtually no heat emissions
The 3D TLC SSD provides outstanding transfer speeds. Improved system startup, data access, application loading, and backup times are realized when upgrading systems to an Axiom SSD. External DRAM and SLC Cache is included and further enhances read/write and IOPS ratings. The 3D TLC SSD is an ultra-low-power storage solution with DevSleep support, providing improved notebook battery life. 3D TLC SSDs are compatible with any operating system and work in both SATA and SAS environments.
Fast Performance
• Highest read and write speeds in its class
• Virtually zero spin up or seek times
• Zero rotational latency
• High sustained data transfer rate
Secure
• OPAL 2.0 Compliant
• 256-bit AES compliant Data Encryption
Reliable
• TRIM, Wear Leveling, StaticDataRefresh and LDPC ECC functions optimize data processing efficiency
• S.M.A.R.T. and a built-in temperature sensor assist with monitoring drive health
• No volatile memory elements
• Improved resistance to shock & vibration
• Predictable and manageable failure modes reduce IT costs
Reduced Power Requirements
• No moving parts
• Super-low operating and standby power needs
• Power requirements notably reduced over a typical HD
Improved Operation
• Noise and vibration free
• Virtually no heat emissions
| Hard drive | |
|---|---|
| SSD capacity | 1.92 TB |
| Memory type | 3D TLC |
| Data transmission | |
| Read speed | 565 MB/s |
| Write speed | 530 MB/s |
| Random write (4KB) | 91000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Data transfer rate | 6 Gbit/s |
| Security | |
| Security algorithms | 256-bit AES, TCG Opal 2.0 |
| Endurance | |
| Mean time between failures (MTBF) | 1500000 h |
| Features | |
| Interface | Serial ATA III |
| Component for | Universal |
| Controller type | SMI SM2258 |
| TBW rating | 600 |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES, TCG Opal 2.0 |
| S.M.A.R.T. support | Yes |
| Read speed | 565 MB/s |
| TRIM support | Yes |
| Write speed | 530 MB/s |
| Protection features | Shock resistant, Vibration proof |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 91000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Mean time between failures (MTBF) | 1500000 h |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Drive writes per day (DWPD) | 0.27 |
| Power | |
| Power consumption (idle) | 0.09 W |
| Operating voltage | 5 V |
| Performance | |
|---|---|
| Interface | Serial ATA III |
| Component for | Universal |
| Controller type | SMI SM2258 |
| TBW rating | 600 |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES, TCG Opal 2.0 |
| S.M.A.R.T. support | Yes |
| Read speed | 565 MB/s |
| TRIM support | Yes |
| Write speed | 530 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 91000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Mean time between failures (MTBF) | 1500000 h |
| Hardware encryption | Yes |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Component for | Universal |
| Protection features | Shock resistant, Vibration proof |
| SSD form factor | 2.5" |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Storage drive spacer included | Yes |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 95% |
| Operating shock | 1500 G |
| Vibration resistance | 3.1 G |
| Technical details | |
| Interface | Serial ATA III |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -40 - 85 °C |
| Protection features | Shock resistant, Vibration proof |
| Operating relative humidity (H-H) | 5 - 95% |
| ECC | Yes |
| Operating shock | 1500 G |
| Native Command Queuing (NCQ) | Yes |
| Hardware encryption | Yes |
| SSD form factor | 2.5" |
| Warranty period | 3 year(s) |
| Compliance certificates | CE, Federal Communications Commission (FCC), RoHS, Trade Agreements Act (TAA) |
| Other features | |
| Warranty period | 3 year(s) |
| Compliance certificates | CE, Federal Communications Commission (FCC), RoHS, Trade Agreements Act (TAA) |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Storage drive spacer included | Yes |
You may also be interested in
| Product |
Axiom SSD3558HX1T9-AX internal solid s...
Login for pricing
|
Hot Product
Transcend MTS800 512 GB M.2 Serial ATA...
Login for pricing
|
Bestseller
Transcend SSD420I 512 GB 2.5" Ser...
Login for pricing
|
Axiom Enterprise EV200 480 GB 2.5"...
Login for pricing
|
Axiom EP400 960 GB 2.5" Serial AT...
Login for pricing
|
Popular
Axiom Enterprise EV200 480 GB 2.5"...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
SSD3558HX1T9-AX
|
TS512GMTS800
|
TS512GSSD420I
|
816899-B21-AX
|
SSDEP40DG960-AX
|
SSDEV20DE480-AX
|
| Manufacturer |
Axiom
|
Transcend
|
Transcend
|
Axiom
|
Axiom
|
Axiom
|
| Interface |
Serial ATA III
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
| Memory type |
3D TLC
|
MLC
|
MLC
|
MLC
|
MLC
|
MLC
|
| SSD capacity |
1200GB to 2000GB
|
500GB to 800GB
|
N/A
|
N/A
|
N/A
|
N/A
|
| Component for |
Universal
|
N/A
|
N/A
|
Server/workstation
|
Server/workstation
|
Server/workstation
|
| SSD form factor |
2.5"
|
M.2
|
2.5"
|
2.5"
|
2.5"
|
2.5"
|





