We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Square D (Schneider Electric)
Shop By
-
Square D (Schneider Electric) ATV 320 Variable Speed Drive, Compact, 500V, 1.4A, 0.5 HP
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 0.37kW / 0.5hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet -
Square D (Schneider Electric) Altivar 12 Variable Speed Drive, 1-Phase, 200-240 V AC, 2.2 kW, 3 hp
Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 2.2kW / 3hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation an -
Square D (Schneider Electric) Altivar 12 Variable Speed Drive, 1-Phase, 200-240 V AC, 0.75 kW, 1 hp
Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation a -
Square D (Schneider Electric) Mechanical Lug Kit For 200 to 250A J Frame Circuit Breakers
PowerPact H- and J-Frame Molded-Case Circuit Breakers (150A and 250A) is a flexible, high performance offer certified to global standards. They are available with optional features such as Thermal magnetic or Micrologic™ trip protection 15–250A up to 600Vac and 250Vdc. They also come with a high performance UL listed interrupting ratings from 18 to 200kA at 480Vac. PowerPact H- and J-Frame have common mounting holes, handle locations and trim dimensions with many shared accessories and auxiliaries. This PowerPact mechanical lug is a connection accessory. This PowerPact J-Frame accessory has a rated current of 200-250A and is made of aluminium and comes in set of 3. These accessories are UL, CSA, NOM, IEC, CCC certified and CE marked for global acceptance. This product comes with an 18 month warranty. -
Square D (Schneider Electric) Meter Socket Closing Plate, Rainproof, 1.5 in., Bolt-On, Compatible with A Hub Series
Square D individual meter sockets have provisions to feed a downstream main lug load center, main breaker load center, or an individually enclosed service disconnect. Units can have a combination of releases, horn, or no bypasses to handle any meter socket situation. Units supplied with hub opening in top end wall require the use of a bolt on hub or closing plate. This accessory is a hub which is rated for 1.50 in wire size on Series A systems. This hub is rainproof and measures at 3.31 inches tall, 3.31 inches wide and 1.03 inches deep. -
Square D (Schneider Electric) Terminal Block, screw end clamp, for 35 mm DIN rail track
Linergy accessories round out the Linergy terminal block line. This end clamp is used to hold terminal blocks tightly together on 9080MH mounting track. One end clamp is to be used on each end of a terminal block assembly. This end clamp is held in place by tightening the two mounting screws. -
Square D (Schneider Electric) Terminal block, Linergy, jumper, 2 pole, for 9080GK6 or 9080GR6 terminal blocks
Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. Terminal block jumpers are used to make one side of several terminal blocks to have a common source. This 2 pole jumper is made of copper. The spacing of this jumper is designed to work with 9080GR6 or 9080GK6 terminal block. This jumper with carry the 60 amperes of the 9080GR6 and 40 amperes of the 9080GK6 terminal block. -
Square D (Schneider Electric) Type TF Industrial Control Transformer, 1-Phase, 240x480V Primary, 120V Secondary, 200VA
We offer both product lines with factory installed overcurrent protection fuse blocks. Type TF and EOF transformers consist of two primary fuse blocks and one secondary fuse block, a configuration that meets the majority of overcurrent needs by panel builders and machinery OEMs. Since the fuse blocks are pre-wired and mounted on top of the transformer, the Type TF and EOF transformers have the same footprint as the Type T and Type EO units, respectively. This design frees up space normally used for separate fuse blocks. We also have an extensive fuse block offering for custom applications. See the overcurrent section of this catalog for full details. This Industrial Control Transformer has a power rating of 200VA and is 1 phase. This transformer has a 220 x 440V primary voltage and 110V secondary voltage. This transformer complies to UL, CE CSA standards. Dimensions for this product are 4.5 in (H), 3.75 in (W), 3.59 in (D). This transformer has screw clamp terminals connections. The m -
Square D (Schneider Electric) Type TF Industrial Control Transformer, 1-Phase, 240x480V Primary, 120V Secondary, 1000VA
Control power transformers from Schneider-Electric set the industry standard for design innovation and performance. They are designed with low impedance windings for excellent voltage regulation and can accommodate the high inrush current associated with contactors, starters, solenoids, and relays. A variety of designs are available to meet the diverse needs of panel builders and machinery OEMs. The versatility of our control transformer line offers unparalleled options for design engineers. Type TF and EOF transformers consist of two primary fuse blocks and one secondary fuse block, a configuration meets the majority of overcurrent needs by panel builders and machinery OEMs. Since the fuse blocks are pre-wired and mounted on top of the transformer, the Type TF and EOF transformers have the same footprint as the Type T and Type EO units, respectively. This industrial control transformer has a power rating, of 1000 VA and is 1 phase(UL). With a primary voltage of 240 x 480V and a second -
Square D (Schneider Electric) Fingersafe Protective Cover, Compatible with Industrial Control Transformers, 1.669 H x 2.374 W x 0.992 in. D
Control power transformers from Schneider Electric set the industry standard for design innovation and performance. This industrial control transformer, Terminal Cover has been certified by UL,CSA, cUL listed, CE NOM standards. A variety of designs are available to meet the diverse needs of panel builders and machinery OEMs. The versatility of our control transformer line offers unparalleled options for design engineers. This Transformer's Product Compatability for use with D1, D2, D3, D4, D5, D13, D14, D33, D37, D15, D20, D23, D31, D32 with a power rating of 250-5000 VA and comes in 1 set of 10, (set of 2). They are designed with low impedance windings for excellent voltage regulation, and can accomodate the high inrush current associated with contactors, starters, solenoids, and relays.
