We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
L. H. Dottie
Shop By
-
L. H. Dottie Drop-In Anchor, Anchor Size 1/4-20, Drill Size 3/8 in., AT25 Tool Required, Zinc Plated Steel
Dottie drop-in anchors perform well in a variety of concrete strengths. Can be used in brick. Any head style screw can be used. The screw can easily be removed or loosened and retightened. Drill hole in concrete and drop anchor into hole. Place setting tool over anchor and hammer until set. -
L. H. Dottie 1/2 in. 12 ga. Zinc Plated Steel Nail Strap For EMT Conduit (100)
Dottie nail straps are a stamped steel strap (J-hook) which is nailed into studs to support tubing, pipe or EMT. -
L. H. Dottie Steel Ceiling Cover Plate
Adjustable strap for 3 or 4 in. boxesWhite color blends with most installationsTemporary or permanent -
L. H. Dottie L H Dottie Cutting Oil, 16 oz.
Reinforced With High-ViscosityOils And Sulfur-Free Extreme Pressure AdditivesProlongs Tool life, Reduces Tool Sharpening And Down TimeLubricates And Cools At The Cutting Point -
L. H. Dottie 300 Piece Assorted No. 6 Phillips/Slotted Pan Head Sheet Metal Screws, 1/2 Thru 2 in.
The 6PS Kit is an assorted Phillips/Slotted Sheet Metal screw kit that features six different sizes of 6 screws. The sizes range from 1/2'' to 2'' and are used to fasten light metal sheets, wood, and plastic. -
L. H. Dottie Flat 1/4 x 2 in. Hanger Screws
Flat Head Hanger screws are manufactured with aggressive threading and a drill point intended to attach drop ceiling tie wire to steel. -
L. H. Dottie 3/8 in.-16 x 1/2 in. Grade 5 Hex Head Cap Screw
Grade 5 Hex Cap Screws are made from carbon steel and are used in applications where medium strength is necessary, typically those where controlled clamp force and high loads are required. These screws can be screwed into internally tapped holes or used with a nut. Grade 5 Hex Cap Screws should always be used with a hardened washer under the turned component. SAE J429 covers the material and performance requirements of Grade 5 Hex Cap Screws and ASME B18.2.1 covers the dimensional requirements. -
L. H. Dottie 1/4 x 1/2 in. Zinc Plated Steel Hex Head Cap Screws With Partial Thread
Grade 5 Hex Cap Screws are made from carbon steel and are used in applications where medium strength is necessary, typically those where controlled clamp force and high loads are required. These screws can be screwed into internally tapped holes or used with a nut. Grade 5 Hex Cap Screws should always be used with a hardened washer under the turned component. SAE J429 covers the material and performance requirements of Grade 5 Hex Cap Screws and ASME B18.2.1 covers the dimensional requirements. -
L. H. Dottie 1/4-20 Grade 5 Zinc Plated Steel Finished Hex Nuts (100)
Grade 5 Hex Nuts are manufactured from carbon steel and are used to connect both metal and wood components. They are intended to be used in conjunction with bolts, screws, studs, threaded rod and any other fastener that has machine screw threads. Typical applications for Grade 5 Hex Nuts include scenarios where medium strength of 120,000 psi is required. They are manufactured to the SAE J995-2017 standard. -
L. H. Dottie Construction Marking Paint, Red
Construction Marking Paint is the premium paint offering from L.H Dottie. It is packaged in a can that can only be operated in an upside down position and is formulated to meet a variety of marking applications. It is designed to adhere to most surfaces including pavement, gravel and soil.
