Hoffman (nVent)

Shop By

374 Products found

Set Descending Direction
View as List Grid
  1. Hoffman (nVent) Ladder Rack Straight Section, Black, 18 in. W

    Ladder Rack Straight Section (cULus Classified) 12 in.W, Black Supports cable on straight runs Made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) 16 gauge tubular steel with a painted or plated finish.
    Login for pricing
    Out of stock
  2. Hoffman (nVent) Ladder Rack Straight Section, Black, 12 in. W

    Ladder Rack Straight Section (cULus Classified) 12 in.W, Black Supports cable on straight runs Made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) 16 gauge tubular steel with a painted or plated finish.
    Login for pricing
    Out of stock
  3. Hoffman (nVent) Enclosure LED Light Kit, 5W, AC Power, Screw Mount, On/Off Switch, Fluorescent Light

    Provide interior enclosure lightingIdeal for remote and darkened enclosure applicationsCan be mechanically fastened with included hardware to maintain enclosure UL listing (up to Type 4X) Can be magnetically attached to flat steel surfacesLights have auto-sensing circuitry (AC voltage 90 VAC to 265 VAC and DC voltage 20 VDC to 60 VDC)Lights are light-weight and in a small form factor while providing 400 LM of 6000-7000K light
    Login for pricing
    Out of stock
  4. Hoffman (nVent) NEMA 1 Screw-Cover Wireway, 8 W x 8 in. H, length 3 ft.

    This Steel painted screw cover wireway features an open design on one side so wires and cables can be laid in safely along the entire run without pulling, a practice that can damage insulation.
    Login for pricing
    Out of stock
  5. Hoffman (nVent) ACCESSPLUS8482 Wall Mount Cabinet, Double-Hinge, Type 1, Window Door, 12 RU, 23.6 H x 23.62 W x 18.2 in. D

    Features of ACCESSPLUS174 cabinets:Double-hinged for easy equipment accessRound corners - no sharp edgesCenter section easily removed from rear sectionSelf-grounding, plated steel rack angles fully adjustable within center sectionWall section provides cable entry and cable managementSelf-locking center-to-wall section latches in two locationsFront access to all latches - cabinet can be installed tightly in cornersVented sides provide cross flow ventilation to improve heat dissipationFront door has 140-degree openingWindow door is scratch-resistant 1/4 inch tinted safety glassCenter section has solid top that provides protection against falling debrisEIA universal spaced 19 inch rack-mounting holesRear wall section has raised pads for accessory mountingCable tie down points for cable managementThree cable-entry grommets
    Login for pricing
    Out of stock
  6. Hoffman (nVent) Single-Sided Rack Shelf, Steel, Solid, 75 lb. Capacity, 15 in. D, Jet Black

    Solid shelf has RAL 9005 black finish. Shelf has a load rating of 75 pounds.
    Login for pricing
    Out of stock
  7. Hoffman (nVent) CableTek8482 EC Cable Manager with Posts Gates, Vertical, Double-Sided, 6 in. W

    Double-Sided Vertical Cable Manager with Posts and Gates:The front side provides support, management and high cable capacity for patch cords with easy-to-remove front covers standardThe rear of the manager provides the same support for horizontal cabling (Cat 5e, 6, 6A and fiber) Universal mounting pattern for 2- and 4-post open-frame racksEasy-to-install with self-aligning, self-captivating carriage bolts for single-sided attachmentArrowhead supporting fingers provide easy insertion, removal and alignment of Cat 5e, 6, 6A and other cable typesDeep cable depth provides smooth transition of cables from vertical to horizontal positionsLarge feed-through holes and pre-scored grommets provide cable feed from front to back of cable managerUnobstructed cable access for all rack unit locationsExtra deep cable channel for maximum cable density has multiple cable tie-down pointsStandard front cover, with field installed snap hinges, provides cable access from right, left or neutral Double-sided
    Login for pricing
    Out of stock

374 Products found

Set Descending Direction
View as List Grid