We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Hoffman (nVent)
Shop By
-
Hoffman (nVent) Type 4X Enclosure, Aluminum, Continuous Hinge Cover with Clamps, 24 H x 24 W x 8 in. D
Type 5052 H-32 aluminumSeams continuously welded and ground smoothRolled lip around three sides of door and all sides of enclosure openingStainless steel door clamp assembliesDoor is easily removed by pulling stainless steel continuous hinge pinData pocket is high-impact thermoplasticHasp and staple for padlockingPanel screws are platedTapped pads provided for mounting optional panelsOil-resistant gasket -
Hoffman (nVent) Type 12 Enclosure, 14-Gauge Steel, Continuous Hinge Cover with Clamps, Small Data Pocket, 20 H x 16 W x 10 in. D
Enclosure door is 14 gauge steel, enclosure body is 16 gauge steel and white inside with an ANSI 61 grey finish outside. Enclosure has 2 clamps and a small data pocket. -
Hoffman (nVent) NEMA Type 1-Medium Junction Box, Hinge Cover, Painted Steel, Equipment Mounting Studs, 16 x 16 x 6.62 in.
14 GaugeDoors have butt hingesCollar studs provided for mounting optional panelSlotted flush latchesMounting holes on back of enclosure -
Hoffman (nVent) Panel for Junction Boxes, 14-Gauge Steel, Painted, 10.75 H x 10.88 in. W
Steel panels are 14 gauge, finished with white polyester powder paint or with a conductive, corrosion-resistant coating. Stainless steel panels are 14 gauge Type 304 and have a commercial 3 finish which is protected on one side with a plastic film. Panel mounting hardware is furnished with all enclosures which accept these panels. -
Hoffman (nVent) NEMA Type 1-Small Junction Box, Hinge Cover, Painted Steel, Equipment Mounting Studs, 12 x 12 x 6 in.
16 GaugeFlush slotted latch operated with a screwdriverWeldnuts provided for mounting optional panelsButt hingesMounting holes on back of enclosure -
Hoffman (nVent) Panel for Junction Boxes, 14-Gauge Steel, Painted, 8.75 H x 8.88 in. W
Steel panels are 14 gauge, finished with white polyester powder paint or with a conductive, corrosion-resistant coating. Stainless steel panels are 14 gauge Type 304 and have a commercial 3 finish which is protected on one side with a plastic film. Panel mounting hardware is furnished with all enclosures which accept these panels. -
Hoffman (nVent) Steel Painted Wall Angle Support, Black Finish, 12 in. W
Wall Angle Support, Black, 14 inch L x 12 inch R x 12.38 inch SSupports ladder rack from wall or other flat surface. Made of 2-inch x 2-inch 10 gauge steel angle with painted or plated finish.Includes two J-bolts, nuts and screws. -
Hoffman (nVent) Ladder Rack Radius Drop
The Cable Runway Radius Drop Kit mounts over ladder rack cross members to provide a bending radius when dropping cable. The kit includes cable spools to separate cable and all mounting hardware necessary.
