We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Dura-Line
Shop By
-
Dura-Line 2"" Split-Lock +
The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16†nut driver. -
Dura-Line 1"" SDR 13.5 Smoothwall w/ 1250 Tape - 6,000' Reel
Our most popular HDPE duct, Smoothwall is available with an optional SILICORE® ULF permanently lubricated lining. These ducts perform well in all environments, aerial, direct buried, and underground. Multiple wall thickness are available based on the application. -
Dura-Line Coupler 1-1/4in. shur-lock fits od 1.460in. -1.860in. Stainless steel band clamps and locking ring/ 700 lb. pull out strength.
Shur-Lock II is a plastic coupler designed for coupling HDPE PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16"" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1"" - 3"" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing. -
Dura-Line HydraLube AT-500 Summer 5 Gallon Pail
Hydralube® AT-500 is a high performance silicone lubricant formulated specifically for use with compressed air-assisted cable blowing, jetting and pushing systems. These systems inject a high volume of air into the conduit which will rapidly dry out conventional cable placement lubricants (including silicone-based) and cause surface stickiness. Futhermore, the initial temperature of the compressed air can be very high, which will accelerate drying of the lubricant. Hydralube® AT-500 deposits a special low friction silicone coating on the conduit wall surface that is resistant to the drying effects of the rapid air movement and high heat. This product is fully compatible with cable jackets and HDPE or PVC conduit systems. -
Dura-Line 2"" SCH 40 Smoothwall - 3,500' Reel
Our most popular HDPE duct, Smoothwall is available with an optional SILICORE® ULF permanently lubricated lining. These ducts perform well in all environments, aerial, direct buried, and underground. Multiple wall thickness are available based on the application. -
Dura-Line 1 1/4"" SDR 13.5 Smoothwall - 6,000' Reel
Our most popular HDPE duct, Smoothwall is available with an optional SILICORE® ULF permanently lubricated lining. These ducts perform well in all environments, aerial, direct buried, and underground. Multiple wall thickness are available based on the application. -
Dura-Line HDPE coupler, Orange, 2 in.
Installation is fast and easy no heat or tools are needed. Simply push the duct ends into the coupler for a locked and air-sealed assembly. -
Dura-Line Coupler 1-1/4in. E-Loc,1.660 OD SDR, 6in. Length,PVC-HDPE-FRE-metal, Push-On Coupler
A low-cost push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters. -
Dura-Line 2"" Shur-Lock II
Shur-Lock II is a plastic coupler designed for coupling HDPE PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16"" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1"" - 3"" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.
